Air Bag Control Module: Service and Repair
65 77 016 Removing And Installing/replacing Airbag Control Unit
IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).
WARNING:
Note airbag safety instructions.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
- Disconnect battery negative lead and cover
- Remove storage compartment
If necessary, remove foam cover from airbag control unit.
Disconnect plug connection (1).
Release screw (2) and nuts (3).
Tightening torque 65 77 1AZ.
Installation:
Before screwing down airbag control unit (4), make sure negative lead (5) is resting on associated threaded pin.
Remove airbag control unit (4) in direction of arrow.
2010 BMW 128i Convertible (E88) L6-3.0L (N51) BMW Repair Guide Page 2
Replacement:
Carry out programming/coding.
